Siko MSK210, Перевод оригинальной инструкции по установке, Страница: 19 / 32

MSK210
Identification English
MSK210 · Date 08.02.2018 · Art. No. 81417 · Mod. status 41/18
19
External magnetic fields
Failures and data loss occur if strong magnetic fields influence the internal
measuring system.
` Protect the magnetic sensor from impact by external magnets.
3 Identification
Please check the particular type of unit and type number from the identifi-
cation plate. Type number and the corresponding version are indicated in
the delivery documentation.
e. g. MSK210 - 0023
variant number
type of unit
Identification by printing on the tape.
e. g.
MBxxxx GEK WT RP NNNNNN
batch number
reference point
material carrier tape
accuracy
MB type
4 Installation
4.1 Mechanical mounting
Magnetic sensor failure
` When mounting pay attention to the IP type of protection (see chap-
ter 8 ).
` Do not open the sensor yourself.
` Avoid blows to the unit.
` Do not modify the device in any way.
` The cable must be provided with strain relief. If necessary use drag
chain or protective sleeve.
Loss of measured values
` The tolerance and gap measures be observed over the whole measur-
ing length.
Exemplary sensor figures are valid for all sensor types unless described
separately.
CAUTION
CAUTION
NOTICE
NOTICE