AG02
Transport, Storage, Maintenance and Disposal English
AG02 · Date
31.10.2012 · Art.
No.
82270 · Mod.
status
354/12
55
6 Transport, Storage, Maintenance and Disposal
Transport and storage
Handle, transport and store actuators with care. Pay attention to the fol-
lowing points:
•
Transport and / or store actuators in the unopened original
packaging.
•
Protect actuators from harmful physical influences including dust,
heat and humidity.
•
Do not damage connections through mechanical or thermal impact.
•
Prior to installation inspect the actuator for transport damages. Do
not install damaged actuators.
Maintenance
With correct installation according to chapter
the actuator requires no
maintenance. The actuator has received lifetime lubrication and need not
be lubricated under normal operating conditions.
Disposal
The actuator's electronic components contain materials that are harmful
for the environment and are carriers of recyclable materials at the same
time. Therefore, the actuator must be recycled after it has been taken out
of operation ultimately. Observe the environment protection guidelines of
your country.
7 Accessory connector
(not included in the scope of delivery)
7.1 Straight matting connector M16
Advice
`
Strand cross sections of lines max. 0,25 mm² (12 pin) / cable feed-
through: ø6-ø8 mm.
`
Strand cross sections of lines max. 0,75 mm² (7 pin + 3 pin) / cable
feed-through: ø4-ø6 mm.
NOTICE
