EtherHaul Operation, Administration and Maintenance Manual
Page 81
In Priority-Shaper scheduling, packets in the lower priority queues are served only if all
higher priority queues are empty.
9.4.4
Scheduling Mode: WFQ-Shaper
Figure 9-9 Advanced Config Page: Quality of Service
– Scheduler Mode WFQ-Shaper
Combination of the Shaper and WFQ scheduling. Queues are served based on their
weights and the CIR value limits the maximum rate of the particular queue.
9.5
QoS Configuration Commands
In the QoS Configuration click
Show
to view (pop-up screen) the full QoS configuration
in the form of CLI commands.
Click
Restore
to restore factory default QoS settings. The system will run the existing
restore_qos_config script (from the list of scripts available) that will restore factory
default QoS settings.
9.6
QoS Statistics
Queues ingress (in-queue) and egress (out-queue) statistics can be monitored using
the advanced statistics counters.
Click
View Statistics
to review the local and remote queue statistics. Clicking
Show
Statistics
will open the
Statistics
page where all system’s statistics can be reviewed.
Refer to the
Statistics
chapter of this manual for detailed description of the system’s
statistics.
