EtherHaul Operation, Administration and Maintenance Manual
Page 43
6.3.4
Scripts
Figure 6-6 System Page: Maintenance
– Scripts
The EtherHaul supports the use of pre-composed, multiple-line command scripts.
A script is simply a list of CLI commands, saved as a text file that runs locally on the
system. Script output is displayed on a script output screen and can be copied and
saved.
The
Scripts
section displays the scripts that were loaded to the system.
There are useful scripts that are pre-loaded to the system in the factory:
1)
clear_statistics
– this scripts clears all the statistics counters of the system,
including RF statistics, Ethernet statistics, VLAN statistics and Queue
statistics.
2)
System_info
– this script collects all the relevant system status, logs,
configurations and statistics.
3)
Restore_networking_config
– restore all Ethernet networking configuration
(VLANs) to default. Refer to the
Ethernet Services Configuration and
Monitoring
chapter for description.
4)
Restore_qos_config
– restore all Quality of Service configuration to default.
Refer to the
Quality of Service
chapter for description.
For EH-1200F/FX and EH-600T systems, additional scripts are available:
5)
Bridge_mode_customer-nni
– change bridge configuration. Refer to the
Ethernet Services Configuration and Monitoring
chapter for description.
6)
bridge_mode_customer-uni
– change bridge configuration. Refer to the
Ethernet Services Configuration and Monitoring
chapter for description.
