EtherHaul Operation, Administration and Maintenance Manual
Page 44
Select a script from the list and click
Show
to view (pop-up screen) list of commands
composing this script.
Click
Run
to run the selected script. The commands in the script will be executed
one after the other. Pop-up screen will display the progress and outcome of the
script.
Click
Delete
to delete the selected script.
Enter a file name and click
Load Script
to load a new script file.
When clicking
Load Script
, the system will look for the file at the FTP directory
and will store it in the file system as a new script (under directory
scripts/
).
6.3.5
Configuration Management
Figure 6-7 System Page: Maintenance
– Configuration Management
This section allows configuring the following parameters:
Default Configuration – Click
Restore
to delete current
startup-
configuration.txt
file. After reset, the system will come up with the factory
default configuration (unless
customer_default_config.txt
file is present).
Startup Configuration – Click
Show
to view (pop-up screen) the
startup-
configuration.txt
file. The startup-configuration file lists the commands that
build the configuration the system will come up with after reset.
Click
Load
to load a new startup-configuration file that will replace the current
file and will be used after next system reset.
When clicking
Load
, the system will look for a file named
startup-
configuration.txt
at the FTP directory and will store it in the file system
(flash:)
as the new startup-configuration file. After next reset, the system will come up
with the new configuration.
Note:
Whenever contacting Siklu for support, send the output of this script from both
systems for efficient service (copy the output to a text file).
