EtherHaul Operation, Administration and Maintenance Manual
Page 24
2.
PuTTY configuration (Recommended):
a.
Go to category: Terminal -> Keyboard
Set Backspace key = Control-H
Set The function keys and keypad = Linux
b.
Go to category: Window
Set Lines of Scrollback = 100,000
c.
Save the session and configuration. Give it a name and Click Save. The session
will be stored under the Saved Sessions.
4.
When prompted, enter the username and password. Default:
admin
and
admin
.
login as: admin
EH-1200F, S/N: F323036112, Ver: 6.0.0 11309
Using keyboard-interactive authentication.
Password:
EH-1200F>
3.3
Web-Based Management Main Page
The Web-Based Management provides link view, presenting both local and remote
configuration and monitoring.
Although the local and remote systems IP address is identical (default IP address
192.168.0.1), the remote will be available as well as the EtherHaul uses dedicated
communication channel for local-remote communication that is not IP-based.
It is recommended, however, to assign dedicated IP address for local and remote
systems.
Note:
Depending on your station’s screen size and resolution, you may need to scroll the
screen vertically or horizontally in order to view all options for local + remote.
Alternatively, you may change the change the Internet’s Browser display distance
(Zoom out, using Ctrl+Minus).
The Web-Based Management Main page is a read-only page and displays the following
information:
Link Status – Link up or down (with visual indication)
Link Length [m] – link calculated distance between the local and remote systems
(air distance) based on propagation time.
Note that Link Length reading supported on EH-600T and EH-1200F/FX platforms
only.
Tx/Rx frequency [MHz].
RSSI [dBm] – Receiver Signal Strength Indicator. Current receive level.
