IP-7900-20/21/7700-20/21 Advanced Operation Guide
38
1
R E W I N D I N G M E D I A
Rewind the media.
See "
Feed or rewind media
" on the
page 36
.
CAUTION
- Rewind the media after the printed image completely
dries. If the media is rewound while the image is not
sufficiently dry, the image may be damaged.
2
P R I N T R E A D Y
R O L L : 1 6 2 5 / P A P E R
Press and hold the
key for 1.5 seconds.
Press and hold the key for 1.5 seconds.
The carriage moves and the nest function is activated.
Align the mark at the lower left of the carriage
cover’s front panel with the origin of the next print
image.
Origin
3
N E S T O R I G I N S E T T I N G
C A R R I A G E M O V I N G
,
Move the carriage with the or key to the
position to be set as an origin.
4
N E S T O R I G I N S E T T I N G
[
O K ?
Press the
key to fix the origin setting.
The carriage returns, and the Printer enters online state
(idle mode) and becomes ready to print.
N E S T O R I G I N S E T T I N G
P L E A S E W A I T
P R I N T R E A D Y
N E S T : 1 6 2 5 / P A P E R
To cancel the origin above, press and hold the key
for 1.5 seconds in the idle mode or raise the pressure
control knob. When the origin is cancelled, the display
returns from
[NEST]
to
[ROLL]
.
<Display when the origin is cancelled>
P R I N T R E A D Y
R O L L : 1 6 2 5 / P A P E R
Use the media until the very end
Even when the media end is detected during printing (online mode), a margin remains at the media bottom end.
This remaining margin can also be used for printing.