39
To assist your Printer
in operating effectively
Index
Menu tree
Adjust and calibrate
the Printer
Print quality may be affected when printing near the media bottom end. Use this function only if you can afford this loss
in print quality.The tension bar on the supply side must be removed to print near the media bottom end. The media
advance adjustment value may not be adequate anymore after the tension bar has been removed, which may affect the
print quality.
Set roll end detection to
Action Selection
beforehand.
Detect Only
Printing stops when media end is detected.
Action Selection
Printing stops temporarily when media end error is detected.
Select
or
Cancel
with the operation panel.
1
á
I N K
M E D I A R E G
â
ß
M E D I A M . A D V
à
Set the Printer to offline state and press the
key.
2
# S E L E C T M E D I A
> 0 1 : T Y P E 0 1
[
・・・
With the
key scroll to [#SELECT MEDIA].
3
# R O L L E N D D E T E C T I O N
> 0 1 : D E T E C T O N L Y
[
Press the
key.
4
# R O L L E N D D E T E C T I O N
[
0 1 : D E T E C T O N L Y
[
Press the
key.
5
# R O L L E N D D E T E C T I O N
[
0 2 : A C T I O N S E L E C T .
[
Press the
key.
6
# R O L L E N D D E T E C T I O N
> 0 2 : A C T I O N S E L E C T .
[
When roll end is detected during printing (online mode), printing stops temporarily and the following screen is
displayed.
R O L L E N D D E T E C T E D
P R I N T / C A N C E L
