SII IP-7700-00 Скачать руководство пользователя | Manualshive

Страница: 8 / 101

background image

IP-7900-20/21/7700-20/21 Advanced Operation Guide

8

To assist your Printer in operating effectively

Turn the Printer off

Always set the Printer power to on to perform the fill cap operation.

Fillcap is...?

- To remove nozzle clogging from nozzle surface, use fillcap option. This option fills the cap with ink to

soak the print head (nozzle surface) in the ink for a minimum of 1 to 2 hours. If possible, leave the Printer
overnight.

Use this option also when nozzles cannot be fixed by cleaning repeatedly.

The Printer has an internal clock which allows it to automatically wash the print heads, flushing some ink through
the print heads, which keeps the print heads in good condition. The Printer automatically washes the print heads
72 hours after the last printing, and then regularly washes every 3 days.

If the Printer is turned off for a long period, this process above does not happen. If the ink does not flow through
the print heads regularly, the ink will dry inside the nozzle, reaching a point where they cannot be recovered and
the print heads will fail. This will mean a print head replacement.
So, if the Printer must be turned off, follow the guide below.

For a short period

Clean the print head and the ink flow path with the
storage liquid, and leave the printer with storage
liquid filled.
Prepare the storage liquid set (IP7-137).

Clean the print head and the ink flow path with the
cleaning liquid.
Prepare the cleaning liquid set (IP7-136).

After the head wash, Insert ink trays and charge the
ink system.

Perform the daily maintenance.

When leaving the Printer for
more than one month,
contact your service
representative beforehand.

The service call error is
displayed regardless of
whether service cleaning has
been performed or
not. Contact your service
representative.

For a several days

For two weeks or more

Service cleaning

Head wash

Power-off

Power-on

Charging ink after head wash

Daily maintenance

For one month or more

CAUTION

- To protect the print head, do not leave your Printer for more than one month with no ink charged.
- During the service cleaning or head wash, do not open or close the front cover or the lever. Otherwise, the Printer may

restart its initial operation from the beginning, while wasting the ink and cleaning liquid.

(

page 9)

(

page 14)

(

page 19)

(Basic Operation Guide

page 66)

«
...
6
7
8
9
10
...
»

Содержание IP-7700-00






































































































Отзывы:

Нет отзывов

Похожие инструкции для IP-7700-00

I-Class Mark II

Бренд: Datamax Страницы: 12

Бренд: Malyan Страницы: 9

SPP 2020 - Photo Printer - 20 Sheets

Бренд: Samsung Страницы: 81

Бренд: Samsung Страницы: 98

Бренд: Samsung Страницы: 6

Бренд: Samsung Страницы: 203

Бренд: Samsung Страницы: 264

Бренд: Samsung Страницы: 228

Бренд: Samsung Страницы: 211

Бренд: Samsung Страницы: 5

Бренд: Samsung Страницы: 92

Бренд: Samsung Страницы: 75

Бренд: Samsung Страницы: 11

Бренд: Samsung Страницы: 206

ML 3050 - B/W Laser Printer

Бренд: Samsung Страницы: 103

ML 3050 - B/W Laser Printer

Бренд: Samsung Страницы: 215

Бренд: Samsung Страницы: 2

CLP 510N - Color Laser Printer

Бренд: Samsung Страницы: 266

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды