31
To assist your Printer
in operating effectively
Index
Menu tree
Adjust and calibrate
the Printer
Media is fed in the normal advance sequence.
FWD ONLY
Media is fed in the media adhesion prevention sequence. At the beginning of printing,
media peeling is performed during feeding when the pause mode is cancelled.
BACK&FWD1
Media is fed in the media adhesion prevention sequence. Media peeling is performed
during feeding at each scan.
BACK&FWD2
Advance sequence to prevent wrinkles on solvent printing coated paper.
If five minutes have elapsed after the end of the last printing, the Printer feeds 30 cm of
media before starting to print.
FWD WRINKLEFREE
Solve media lifting up problem
The vacuum pressure applied to the media in the printing zone helps to hold the media down on the platen, which keeps
the distance from media to print heads constant.
When the media lifts up off the platen, set the vacuum pressure to HIGH.
1
á
I N K
M E D I A R E G
â
ß
M E D I A M . A D V
à
Set the Printer to offline state and press the
key.
2
# S E L E C T M E D I A
> 0 1 : P A P E R
[
• • •
With the
key scroll to [#SUCTION FAN
LEVEL]
3
# S U C T I O N F A N L E V E L
> 0 1 : L O W
Press the
key.
4
# S U C T I O N F A N L E V E L
[
0 1 : L O W
x2
Press the
key twice.
5
# S U C T I O N F A N L E V E L
[
0 1 : H I G H
Press the
key.
# S U C T I O N F A N L E V E L
> 0 1 : H I G H
