USER MANUAL
Basic operation
5
3
．
Basic operation
3.1 Installation and connections
WARNING! Improper operation may result in personal injury or
damage of equipment.
Make sure the machine is grounded to prevent electric shock or
damage.
Do not use a power source that does not meet required voltage. Fire
or electric shock may result.
Do not unplug the machine when the power is
on to avoid damage.
Place the machine on a stable surface to
prevent damage from sliding or falling.
3.1.1 Place the cutter on a flat, stable surface.
3.1.2 Connect the serial cable to the COM1 or COM2 port on the cutter and the computer.
3.1.3 Place the media cradle (for desktop cutters) behind and parallel to the cutter.
3.1.4 Check the voltage of the power source and make sure it is grounded. Do not connect the
machine until this step has been completed.
