Sierra Wireless Overdrive Pro 3G, Руководство пользователя

Страница: 86 / 174

78 Settings
From this window, you can view this 4G information:
●
Connection Status
— This field reflects whether you are connected to 4G.
●
Service Type — This field reflects the 4G service type: 4G, 4G Off, or no service.
●
Coverage Type — This is a list of the types of 4G networks that are available. The RSSI and CINR for
each type are shown.
●
RSSI
and
CINR
.
RSSI reflects the signal strength of the network.
CINR stands for Carrier to Interference-plus-Noise Ratio and is a measurement of signal
effectiveness. For the receiver to decode the carrier signal, the latter must be in an acceptable
CINR range.
●
TX Power — This number indicates the transmitter power. A higher number is better.
●
Center Frequency
— This number indicates the frequency of the 4G channel used for the data
connection.
●
NSP-ID
— This number is the ID of the 4G Network Service Provider.
●
NAP-ID — This number is the ID of the 4G Network Access Provider.
●
BSID — This number is the ID of the Base Station.
●
Preamble
— This number is the preamble ID of the current base station that the modem is listening
to.
●
Realm
— This login address is used for 4G service (user@realm).
●
Certificate Information — Click the link to display information in a popup window. You will be
prompted to enter the Service Programming Code (SPC). (If you don't know your SPC, contact your
service provider.)
GPS Panel
1.
Log in to the home page.
2.
Click
Advanced Settings
( ).
3.
Click
WAN > GPS
.
From this window, you can view or adjust these settings, or perform the following actions:
●
Enable GPS — To use GPS, and to configure other GPS settings, this check box must be selected. If
the GPS privacy agreement opens, you must accept it before you can use GPS.
●
GPS Mode
— This setting determines how often the device should obtain a fix.
䡲
One-time
— A single fix is used. Use this option if you’ll be using your device at the same
location.
䡲
Continuous
— Fixes are obtained on a regular basis; also known as auto-tracking. Useful for
turn-by-turn (TBT) navigation applications, such as driving directions.