Sierra Wireless Overdrive Pro 3G, Руководство пользователя

Страница: 54 / 174

46 Using Your Device
䡲
Default Gateway
— This is the address of the node on the computer network that the network
software uses when an IP address does not match any other routes in the routing table (that is,
when an IP packet’s destination address is outside of the local subnet).
䡲
WAN MTU size
— This is the size of the largest packet (“Maximum Transmission Unit”) that a
network protocol can transmit.
Viewing and Configuring Detailed Internet Connection Information
When you’re logged in, the Internet Connection Information window displays a table showing data
use:
●
In the current cycle or since you last reset the data usage figures — whichever occurred more
recently. These numbers get automatically reset to 0 on the day selected in the
Starts on day
list.
●
Over the lifetime of the device.
●
By network [3G and 4G], and by sent, received, and total.
From this window you can:
●
Reset the data usage figures for the current billing cycle. (Click Reset .)
●
Change the start day of the billing cycle (in the
Starts on day
list).
●
See the number of days left in the cycle.
microSD Card Information and Settings
The text next to the microSD icon ( ) indicates whether the card is:
●
Enabled
●
Detected
●
Accessible by all (“shared”) or only the administrator
●
Accessible with or without a password (security)
Click the icon to display the SD Card Information and Settings window. The window displays:
●
The card status (see the list above)
●
Storage capacity of the card, and space available (displayed only if a card is detected)
●
A button to safely eject the card ( Safe-Eject SD Card ; displayed only if a card is detected))
When you’re logged in, you can:
●
Enable or disable the microSD card slot. (See “Enabling the microSD Card Slot” on page 51.)
●
Set up access to the card. (See “Setting Up Access to the microSD Card” on page 51.)