Sierra Wireless Overdrive Pro 3G Скачать руководство пользователя

Страница: 144 / 174

136 Technical Specifications, Safety Information, and Regulatory Information

Proper Battery Use and Disposal

To ensure safe and responsible battery use:

●

Do not open, disassemble, puncture, crush, bend, or shred.

●

Do not expose to water or other liquids, fire, explosion, or other hazards.

●

Use the battery only in the Overdrive Pro 3G/4G Mobile Hotspot.

●

If using with a charger, use only the AC charger supplied with the device.

●

Do not short circuit the battery.

●

When replacing a battery, use the same model of battery that was supplied with the device.

●

Follow local regulations when disposing of a used battery.

●

Avoid dropping the device or the battery. If dropped and you suspect damage, take it to a service
center for inspection.

Note:

Improper battery use may result in a fire, explosion, or other hazard.

Содержание Overdrive Pro 3G















































































































































































Результаты поиска

Содержание Overdrive Pro 3G

Отзывы:

Похожие инструкции для Overdrive Pro 3G

Бренды по названию

Популярные бренды

Sierra Wireless Overdrive Pro 3G, Руководство пользователя

Результаты поиска

Содержание Overdrive Pro 3G

Отзывы:

Похожие инструкции для Overdrive Pro 3G

Бренды по названию

Популярные бренды