Setting up the LAN
Rev 4 May.17
35
3.
Configure the segment's settings and click Save. See
on page 83 for information on each specific setting.
Figure 6-5: LAN segment configuration screen
Note that each LAN segment must have a different scope (i.e. IP address range)
from the other segments. A warning will be provided if an attempt is made to
cross segment scopes as shown in
Figure 6-6: Warning for a segment configuration address range which overlaps another
To assign a device to a different LAN segment:
1.
Navigate to LAN > LAN Segments.
2.
Locate the device to assign and select the LAN segment from the dropdown
in the Actions column.