Sierra Wireless oMG series, Руководство по эксплуатации и настройке, Страница: 18 / 101

Operation and Configuration Guide 3.14
18 4118618
The following screenshot shows the settings for a serial modem WAN link:
Figure 5-5: Serial WAN Link Configuration
For more information see TTY Serial Port Link Configuration Settings on page 74.
5.2 Defining an Access Point Profile for
WiFi Links
An AP profile must be created for each WiFi AP that an oMG will use to access
the WAN. A profile creates an association between the actual AP and the
credentials (i.e. access, security, etc) required to connect to that AP from the
oMG. The settings for a profile must therefore match those defined at the actual
WiFi AP itself.
To define an AP profile:
1. Navigate to WAN > WiFi Networks , click Add New WiFi Network . The WiFi
Network Configuration page will be shown.
2. Configure the AP profile settings based on how they are configured in the
actual AP itself. Information about these settings can be found in
WiFi
Networks Configuration on page 76.
3. Click Save to save the AP profile settings.
4. Set the WiFi link to use the WiFi AP profile:
a. Locate the WiFi link under WAN > Links .