Operating the appliance
en
39
Measure and add detergent
and care products
Caution!
Damage to the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the washing machine.
Do not allow these agents to come into
contact with the surfaces of the washing
machine. If necessary, immediately wipe
away spray residue and other residues/
droplets with a damp cloth.
Dosing
Dose the detergents and care products
according to:
■
Water hardness (ask your water
supply company)
■
The manufacturer's instructions on
the packaging
■
The amount of laundry
■
Soiling
~
Page 34
Filling
:
Warning
Eye/skin irritation!
Detergent and care products may spray
out if the detergent drawer is opened
while the machine is in operation.
Open the drawer carefully.
Rinse eyes/skin thoroughly if they come
into contact with detergents or care
products.
If swallowed accidentally, seek medical
advice.
Note:
Dilute viscous fabric softener and
fabric conditioner with water to prevent
blockages.
Pour the detergent and care products
into the appropriate compartments:
1.
Pull out the detergent drawer as far
as possible.
2.
Add detergent and/or care products.
3.
Close the detergent drawer.
Measuring aid* for liquid detergent
Position the measuring aid for dosing
the correct amount of liquid detergent:
1.
Pull out the detergent drawer.Press
down the insert and fully remove the
drawer.
2.
Slide the measuring aid forwards,
fold it down and click it into place.
3.
Reinsert the drawer.
Note:
Do not use the measuring aid for
gel detergents and washing powder, or
for programs with prewash or when the
"Fertig in" (Ready in) time is selected.
Measuring aid
A
for liquid detergent
Dispenser
II
Detergent for the main wash,
water softener, bleach, stain
remover
Dispenser
i
Softener, starch,
do not exceed
max.
Dispenser
I
Detergent for prewash