en
Operating the appliance
40
Start the programme
Press the
I
button. The indicator lamp
will light up and the programme will
start.
The display panel and timeLight* will
show the "Ready in" time while the
programme is running, or the
programme length plus the programme
progress symbols once the wash cycle
has started.
Display panel
~
Page 31
timeLight*
~
Page 29
*Depends on the model
If you want to lock the programme to
prevent it from being adjusted
inadvertently, you can select the
childproof lock as follows.
Childlock
(
w
3 sec.)
You can lock the washing machine to
prevent the functions you have set from
being changed inadvertently. To do this,
activate the childproof lock when the
program has started.
To
activate/deactivate
, press and hold
the
Spin speed
and
Ready in
buttons at
the same time for approx. three
seconds.The
w
symbol appears in the
display panel.
■
w
lights up: The childproof lock is
active.
■
w
flashes: The childproof lock is
active and the program selector has
been adjusted.To deactivate the
childproof lock, reset the program
selector to the initial program. The
symbol lights up again.
Note:
To avoid the program to
terminate, do not turn the program
selector beyond the Off position.
Note:
The childproof lock remains
active after the program has ended and
the appliance is switched off. You must
always deactivate the childproof lock if
you want to start a new program.
Adding laundry
Following the start of the program, you
can add or remove laundry as required.
Press the
I
button to do this.
The
I
button indicator lamp flashes
and the machine checks whether it is
possible to add laundry.
If the following appears in the display
panel:
■
the
Œ
symbol disappears, and
adding is possible.
■
the
Œ
symbol lights up, it is not
possible to add laundry.
To continue the program, press the
button
I
.The program continues
automatically.
Notes
■
Do not leave the door open for too
long when adding laundry as water
from the laundry may leak out.
■
For safety reasons, the door remains
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
■
The load display is not active during
reloading.
Changing the programme
1.
Press the
I
button.
2.
Select another program.
3.
Press the
I
button.The new
program starts from the beginning.
Cancel the programme
For programs at high temperature:
1.
Press the
I
button.
2.
To cool down laundry: Select
Rinse
.
3.
Press the
I
button.
For programs at low temperature:
1.
Press the
I
button.
2.
Select
Spin
.
3.
Press the
I
button.
