manualshive.com logo in svg

Siemens VersiCharge SG, Руководство по устранению неисправностей, Страница: 40 / 44

Поделиться
Скачать
Siemens VersiCharge SG Скачать руководство пользователя страница 40

SECTION 12

Halo Operation

12.1 Halo states

Halo indicator on VersiCharge indicates the status of the charging session.

State mame

Description

Halo status indicator

Power Available

240V or 208V Power Present

Off

Ready to Charge

EV detected, waiting for charging command from EV

Green - Solid

Charging

Charging EV

Green - Fading in and out

Pause

Operation paused

Off

Delay Timer

Operation awaiting delay timer

Off

Remote

System is controlled via remote control interface

Depends on charging or fault state 

12.2 Halo deactivation

Deactivate to lower power consumption of your device during normal operation. Note:  Deactivation of the 
Halo will prevent the Halo from illuminating in all states, except the Fault state. 

To de/re-activate the Halo: 

  •  Unplug the EV from the chargers and place in the coupler holster.

  •  Verify that the VersiCharge is in the Power Available state by ensuring that only the Power Available    
    indicator and, if applicable, the Wi-Fi Status indicator LED’s are lit. 

  •  Press and hold both the Pause and the Delay Timer buttons simultaneously for 5 seconds. The Halo will  
    blink green three times, and then fade to off.

40

VersiCharge™ SG 

Commissioning and Troubleshooting Guide

Содержание VersiCharge SG













































Отзывы:

Нет отзывов