manualshive.com logo in svg

Siemens VersiCharge SG, Руководство по устранению неисправностей, Страница: 4 / 44

Поделиться
Скачать
Siemens VersiCharge SG Скачать руководство пользователя страница 4

SECTION 1

Important Safety Information

1.1  Read this First

This manual contains important instructions for use during installation, operation and maintenance of the  

 

 

Siemens VersiCharge SG™ electric vehicle (EV) charging station.

1.2  Symbol Legend

The following safety symbols indicate dangerous conditions and important safety instructions and appear  

 

throughout this document to reduce the risk of electrical shock, ensure the safe installation and operation of  

 

 

the Siemens VersiCharge SG.

DANGER

 Hazardous voltage. Will cause death or serious injury. Turn off power before working 

on this equipment. This indicates the present voltage can cause death or serious injury. 
Extreme caution is required when servicing or installing the equipment referenced.

DANGER 

Explosion hazard. This equipment has arcing or sparking parts that should not be 

exposed to flammable vapors. Use extreme caution and follow instructions carefully.

WARNING!

 This indicates a situation where failure to follow instructions may be a safety hazard or 

cause equipment malfunction. Use extreme caution and follow instructions carefully.

  

NOTE:

 This indicates important information for optimal system operation. Follow instructions closely.

 

 

Indicates connection point for ground conductor.

1.3  Product Labels

The following symbols appear on the product label and are described here:

Danger label indicates risk of hazardous voltage and electric shock which will cause death, serious injury, or  

 

substantial damage. Turn off the power  before working inside.

Danger label indicates risk of hazardous voltage and electric shock which will cause death, serious injury, or  

 

substantial damage. Turn off the power  before working inside.

Explosion hazard

. This equipment has arcing or sparking parts that should not be exposed to 

flammable vapors. Use extreme caution and follow instructions carefully.

4

VersiCharge™ SG 

Commissioning and Troubleshooting Guide

Содержание VersiCharge SG













































Отзывы:

Нет отзывов