manualshive.com logo in svg

Siemens VersiCharge SG, Руководство по устранению неисправностей, Страница: 25 / 44

Поделиться
Скачать
Siemens VersiCharge SG Скачать руководство пользователя страница 25

6.7  Diagnostics file download feature

Customer service may request a diagnostic zip file be emailed to them. This will be used for further 
troubleshooting.   

 

NOTE: 

The charge must either stay in AP mode or in Client mode in order to do this download.

6.6  Charger offline/not connected to the VersiCharge SG cloud

• 

See 

5.1 

and 

5.5 

above. 

            

•  Note:  be aware of network extenders.

Diagnostics file download

1

  

Navigate to the cloud, 

https://versichargesg.cloudapp.net

  using any smart device or laptop.

2

Select the charger in question.

3

Expand “Charger Info” and note IP address or use an IP address finder like Fing to find the IP address.

4

IF

The Wi-Fi indicator on front panel is in Client Mode (blinking Red/Green or Red/Orange or Red/Yellow) (post-commis-
sioning).  See Wi-Fi Status table in section 7 below.  

5

THEN

Access the local webpage by inserting the IP address: http://<IP_address_of_the_charger> in a browser address bar.

6

IF

The Wi-Fi indicator is blinking slow Green.

7

THEN

VersiCharge is in Access Point mode. 

8

Connect to the access point with the name similar to vs-IACAEAD238 (see sample below). Proceed to the next step.

25

 

Commissioning and Troubleshooting Guide 

VersiCharge™ SG

Содержание VersiCharge SG













































Отзывы:

Нет отзывов