manualshive.com logo in svg

Siemens VersiCharge SG, Руководство по устранению неисправностей, Страница: 11 / 44

Поделиться
Скачать
Siemens VersiCharge SG Скачать руководство пользователя страница 11

SECTION 4

What You Will Need To Troubleshoot

•  Check that the VersiCharge is plugged in, has power, and the power light is lit.

•  The URL to access the local web pages is:

  1. Charger in Access Point (AP) (Wi-Fi Status light is green) mode:    

 

 http://commission.versichargesg.net

  2. Charger in client mode (Wi-Fi Status light is blinking green/red, yellow/red,  
    amber/red) and is connected to the wireless network:  

 

 

 

  http://<IP_address_of_the_charger>

•  IP address of the device.  After commissioning and connected to local network use  
  an app like Fing downloaded to a smartphone, or a laptop running Windows 7, 8,  
  and 10 connected to the network to get a list of all connected devices (see    
  References, IP Address Identification, at the end of this document.)

 

v

  If the VersiCharge has already been commissioned, log into the Cloud and the IP  

    address will be in the Home page at the bottom, Charger information.

•  Mac Address of the device.  Find the MAC address:  

  -  Remove the Wi-Fi Module, the MAC address is on the label in the front of the  
  Wi-Fi 

Module. 

 

•  Local page URL 

 

v

  Pre-commissioning URL—VersiCharge in AP Mode:  

 

 

 

  http://commision.versichargesg.net; 

    •  AP Mode – Wi-Fi Status light is blinking slowly green

    •  VS-serial number.com - VersiCharge router communicating.

•  Post-commissioning URL – VersiCharge in Client Mode:  

 

 

 

  http://insert charger IP address here (IP address with http:// in front). 

 

v

  Client Mode – Wi-Fi Status light is blinking red/green, red/yellow, red/orange

 

v

  VS-<last 10 characters of serial number>.com – If the customer doesn’t see this  

    or, if the customer sees VS-no charger.com, power cycle the charger. 

•  Place the pre-commissioning or post-commissioning IP address, as appropriate, in  
  the browser address bar and the browser will navigate to the charger’s embedded  
  web pages.

•  Ping the VersiCharge to confirm communication with the router. See also section  
 10.1.

 

v

  Go into the cmd prompt in a laptop/computer and type:  ping space IP address.  

 

v

  If the test times out, the VersiCharge is not communicating with the router.

 

v

  If the ping returns data successfully, it is communicating.

11

 

Commissioning and Troubleshooting Guide 

VersiCharge™ SG

Содержание VersiCharge SG













































Отзывы:

Нет отзывов