Siemens VersiCharge SG Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 44

Siemens VersiCharge SG Скачать руководство пользователя страница 24

6.5 Not connected to the OCPP server, not reporting software firmware

version/serial number

Two conditions can cause this issue: 1. OCPP server outage or; 2. Wi-Fi Module malfunction.

VersiCharge not connecting to the OCPP server, not reporting software firmware version/serial number

OCPP server outage

1

IF

VersiCharge is not communicating, it may be due to an OCPP server outage. Notify Customer Service of the outage.

2

THEN

Try again later.

Troubleshooting the Wi-Fi module

1

Turn the breaker to the VersiCharge to OFF.

2

Open the front cover of the VersiCharge.

Troubleshooting the Wi-Fi module

3

Slide the Wi-Fi Module out of the channel and reseat firmly in channel.

4

Turn the breaker to the VersiCharge to ON; allow time for the VersiCharge reboot.

5

Check Wi-Fi Status light.

6

IF

The VersiCharge is not communicating (Wi-Fi Status not lit),

7

THEN

Call customer service for further instructions.

8

IF

The VersiCharge is communicating (Wi-Fi Status is green or amber)

9

THEN

The Wi-Fi Module is communicating, and cloud connection is possible.

Note: If a new Wi-Fi Module has been provided by Siemens, recommission the VersiCharge by unlinking the charger from the cloud, and
follow the commissioning instructions (see 9. Commissioning, below).

6.6 Charger offline/not connected to the VersiCharge SG cloud

•

See

5.1

and

5.5

above.

• Note: be aware of network extenders.

24

VersiCharge™ SG

Commissioning and Troubleshooting Guide

«
...
22
23
24
25
26
...
»

Содержание VersiCharge SG













































Отзывы:

Нет отзывов