manualshive.com logo in svg

Siemens VersiCharge SG, Руководство по устранению неисправностей, Страница: 38 / 44

Поделиться
Скачать
Siemens VersiCharge SG Скачать руководство пользователя страница 38

:

Linking charger to the account

1

Stop charging and unplug the car from the charger before troubleshooting. 

2

Ensure the breaker powering the dedicated branch circuit is in the OFF position, 

3

Plug in your VersiCharge SG.

4

Turn breaker to ON position.

5

The Power Available LED indicator will turn green, and the Wi-Fi Status LED Indicator will go through the following 
process:

•  Indicator should slowly blink red, then switch to slowly blinking yellow.
•  Once the indicator slowly blinks green, the charger has transitioned to Access Point (AP) mode  

 

and is ready to be connected to a Wi-Fi network.

6

IF

The Wi-Fi Status indicator is not blinking green, there may be a signal strength issue.

7

THEN

Test signal strength (see below).

8

Navigate to the following, using a web enabled device (suggested laptop):  local webpage URL (https://commission.
versichargesg.net/). You are now in the local embedded webpages of the charger.

9

Insert information in each of the fields.

10

Please complete steps 11-15 (all fields are mandatory) and note the information with the username and password 
used to register the account

11

Enter the Username you established during the app registration process.

12

Enter a Charger nickname of your choosing. Be sure to provide unique names, if you have multiple chargers linked 
to your account (username and password).
The name must be a minimum 1 character and maximum of 10, must contain at least one letter, allowed special 
characters !, _, and -

38

VersiCharge™ SG 

Commissioning and Troubleshooting Guide

Содержание VersiCharge SG













































Отзывы:

Нет отзывов