Siemens SITRANS P500, Руководство по эксплуатации, Страница: 116 / 238

Operate
6.2 Parameter description
SITRANS P500 with HART
116
Operating Instructions, 12/2014, A5E02344528-09
PV Selection option PV Selection option
Pressure
•
Off
• Pressure
•
Sensor temperature
• Electronics temperature
•
Static pressure
Level
or
volume
or
mass
•
Off
• Level
•
Volume
• Mass
•
Sensor temperature
• Electronics temperature
•
Static pressure
Volume flow
or
mass flow
• Off
•
Volume flow
• Mass flow
•
Sensor temperature
• Electronics temperature
•
Static pressure
User
• Off
•
User-specific measured
value
• Sensor temperature
•
Electronics temperature
• Static pressure
See also
"2.5.1 1. Display Value" (Page 108)
"2.5.4.2 Pressure Unit"
Factory setting: mbar
Setting range: inH
2
O, inHg, ftH
2
O, mmH
2
O, mmHg, psi, bar, mbar, g/cm
2
, kg/cm
2
, Pa, kPa,
HPa, Torr, atm, MPa, inH
2
O (4 °C), mmH
2
O (4 °C)
Purpose: Selection of the unit for the pressure parameter
Description: You can change the unit for the measured value display locally.
"2.5.4.3 Level Unit"
Factory setting: m
Adjustment range: ft, m, inch, cm, mm
Purpose: Selection of the unit for the level measurement type
Description: You can change the unit for the measured value display locally.
"2.5.4.4 Volume Unit"
Factory setting: m
3
Adjustment range: l, ImpGal, m
3
, bbl, Bushel, yd
3
, ft
3
, in
3
, bbl(fl.), Nm
3
, Nl, Stdft
3
, hl
Purpose: Selection of the unit for the volume measurement type
Description: You can change the unit for the measured value display locally.