Siemens SITRANS LR 300, Инструкция по эксплуатации, Страница: 44 / 140

Page 42 SITRANS LR 300 – INSTRUCTION MANUAL 7ML19985CL02
mmmmm
St
art U
p
Direct Address
In PROGRAM mode, you can access a parameter directly by entering its number.
Modifying a Parameter Value
Once a parameter is accessed, you can set or modify its values.
Changing Parameter Values
1. Press the PROGRAM key
followed by the TOGGLE key to
display the Parameter Number field.
2. Press the TOGGLE key to open
the Parameter Number field. The
Parameter Number field goes blank
and the EDIT icon
appears.
3. Key in the desired parameter number.
Example:
. The new
parameter number and value appear.
1. Select the parameter to modify.
2. Key in the new value. Example:
press
. The new value and the
EDIT icon appear.
3. Press the ENTER key to set the
value. The EDIT icon disappears.
Note:
You can enter parameter numbers below 100 without leading zeros. Enter the
number followed by the ENTER key. Example: To access P005, press .
Notes:
• Security must be disabled. To disable security, set P000 to 1954.
• Values shown are for demonstration purposes only.
• Invalid entries will be rejected or limited.
Note:
The CANCEL key can be used to clear the field.
Value
Value entry field
SITRANS LR 300.book Page 42 Monday, June 10, 2002 7:18 PM