Siemens SITRANS LG250 Скачать руководство пользователя страница 35

Страница: 35 / 92

PBD-51041388

SITRANS LG250 - Operating Instructions

46201-EN-150424

7.3 Parameter adjustment

The main menu is divided into five sections with the following func

tions:

Setup:

Settings, e.g. measurement loop name, medium, vessel,

adjustment, signal output, device unit, false signal suppression,

linearization curve

Display:

Settings, e.g., for language, measured value display, lighting

Diagnosis:

Information, e.g. on instrument status, pointer, measure-

ment certainty, simulation, echo curve

Additional adjustments:

Reset, date/time, reset, copy function

Info:

Instrument name, hardware and software version, date of manu-

facture, instrument features

Note:

For optimum adjustment of the measuring point, the individual sub-

menu items in the main menu item "

Setup

" should be selected one

after the other and provided with the correct parameters. If possible,

go through the items in the given sequence.
The procedure is described below.
The following submenu points are available:

The submenu points described below.

Operating sequence

A parameter change with SIL qualified instruments must always be

carried out as follows.

•

Unlock adjustment

•

Change parameters

•

Lock adjustment and verify modified parameters

This ensures that all modified parameters have been deliberately

changed.

Unlock adjustment

The instrument is shipped in locked condition.

Main menu

Содержание SITRANS LG250





























































































Результаты поиска

Содержание SITRANS LG250

Отзывы:

Siemens SITRANS LG250, Руководство по эксплуатации, Страница: 35 / 92

Результаты поиска

Содержание SITRANS LG250

Отзывы: