manualshive.com logo in svg

Siemens SITRANS FUP1010, Руководство по эксплуатации, Страница: 37 / 208

Поделиться
Скачать
Siemens SITRANS FUP1010 Скачать руководство пользователя страница 37

4. Scroll to [Save/Rename Site]. Press <Right Arrow> then press <ENT> to save site.
5. Press <Left Arrow> and return to the main menu.

Select Pipe Class

1. Press the <Down Arrow> and then <Right Arrow> to highlight [Pipe Data].
2. Press the <Right Arrow> to select Pipe Class. Press <Right Arrow> again and scroll to 

desired Pipe Class.

3. Press <ENT> to select.
4. Pre-programmed Pipe Size and relevant pipe parameters will appear in menu cells. Press 

<Right Arrow> and scroll to desired pipe size. Press <ENT>. Enter dimensions manually if 

pre-programmed dimensions do not match application.

5. Press the <Left Arrow> and return to the main menu.

Select a Liquid Class

1. Press the <Down Arrow> and scroll to [Application Data].
2. Press the <Right Arrow> to select [Liquid Class].
3. Press the <Right Arrow> again and scroll to desired liquid.
4. Press <ENT> to save selection.

①

Select from list.

Connecting

5.2 Sensor Wiring

FUP1010 IP67 Portable Flowmeter

Operating Instructions, 02/2010, A5E02951522A Revision 01

35

Содержание SITRANS FUP1010

















































































































































































































Отзывы:

Нет отзывов