manualshive.com logo in svg

Siemens SITRANS FUP1010, Руководство по эксплуатации, Страница: 36 / 208

Поделиться
Скачать
Siemens SITRANS FUP1010 Скачать руководство пользователя страница 36

Select a Meter Type

1. Press the <MENU> key and select the Meter Type.
2. Press the <Right Arrow> and scroll to [Dual Path Flow].
3. Press <ENT> to select. The [Dual Path Flow] menu will appear.

4. Press <ENT> to select. Press <Right Arrow> to select meter function. Press <ENT>.

Create a Site

1. Before proceeding make sure that English or Metric units have been selected.
2. At the [Channel Setup] Menu press <Right Arrow> and then <Down Arrow> to highlight 

[Create/Name Site]. Press <Right Arrow> to enter a Site name.

3. Press <ENT> to create Site name (e.g., ABC).

①

Insert desired name (8 characters max.)

 

 

 

Note
To select letters: Press <Right Arrow> to cursor and then press <Up/Down Arrows> to 

select letters. Press <ENT> when done.

 

 

 

Note
To select English or metric units: In Meter Type Menu, scroll to Meter Facilities Menu. 

Press <Right Arrow> and select preferred units. Press <ENT> to select. Press <Left 

Arrow> and <Up Arrow> to return to main menu.

 

Connecting
5.2 Sensor Wiring

FUP1010 IP67 Portable Flowmeter

34

Operating Instructions, 02/2010, A5E02951522A Revision 01

Содержание SITRANS FUP1010

















































































































































































































Отзывы:

Нет отзывов