Siemens SITRANS FUP1010 Скачать руководство пользователя страница 118

Страница: 118 / 208

Required forms

● Delivery Note
● Cover Note for Return Delivery with the following information

Return delivery form (

http://support.automation.siemens.com/WW/view/en/16604370

)

– product (ordering number)
– number of devices or spare parts returned
– reason for the return

● Declaration of Decontamination

Decontamination declaration (

http://pia.khe.siemens.com/efiles/feldg/files/Service/

declaration_of_decontamination_en.pdf

)

With this declaration you certify

that the returned products/spare parts have been carefully

cleaned and are free from any residues.

If the device has been operated together with toxic, caustic, flammable or water-damaging

products, clean the device before return by rinsing or neutralizing. Ensure that all cavities

are free from dangerous substances. Then, double-check the device to ensure the cleaning

is completed.

We will not service a device or spare part unless the declaration of decontamination

confirms proper decontamination of the device or spare part. Shipments without a

declaration of decontamination will be cleaned professionally at your expense before further

proceeding.

You can find the forms on the Internet and on the CD delivered with the device.

Maintenance and service
9.5 Return procedures

FUP1010 IP67 Portable Flowmeter

116

Operating Instructions, 02/2010, A5E02951522A Revision 01

Содержание SITRANS FUP1010

















































































































































































































Результаты поиска

Содержание SITRANS FUP1010

Отзывы:

Siemens SITRANS FUP1010, Руководство по эксплуатации, Страница: 118 / 208

Результаты поиска

Содержание SITRANS FUP1010

Отзывы: