Siemens SITRANS FUP1010 Скачать руководство пользователя страница 146

Страница: 146 / 208

● For site data or Waveshape data: filename.txt
● For Datalogger data: filename.csv

. On PC type the proper command for the data desired (Logger, Site, or DP) and then [Enter].

. The data now begins streaming on the HyperTerminal screen.

. Wait for EOT (End Of Transmission) to be displayed.

. Close the file by pointing to [Transfer], drag to Capture Text and click Stop button.

Closing the Terminal or HyperTerminal Program

You may now close the Terminal program. The file(s) you have downloaded are now saved

in the location you selected. You may now import the file you have saved into the appropriate

program (i.e., MS Word for site data, or MS Excel for Datalogger or Wave shape data for

graphing or analysis).
The Datalogger contains data that has its fields separated by commas. By using the file

extension ".csv" (comma separated values) suggested earlier, the data will import directly into

MS Excel without any further modification. For the wave shape data, the fields are separated

by spaces, therefore, it is best to save those files as .txt and then use the MS Excel Import

Wizard to select "Space Delimiters" for importation of the data.
Site data is downloaded in plain text and can be imported directly into MS Word.

To Clear Active Memory using the RS-232 Interface

1. Turn off power (if it is currently on). Turn power on. As soon as you apply power, immediately

type the @ character three times. The prompt: [Clr Active Memory? No] appears at the top

of the screen.

2. Press the <Right Arrow> and then the <Down Arrow> to switch the option list to: [Clr Active

Memory? Yes] Press <Enter> to clear all Active Site Data (but not saved site setups).

3. To restore operation, press <MENU> to access the Installation Menu. Create a new site

setup or recall a stored site setup. Re-select any Meter Facilities items (e.g., RS-232 setup

parameters).

To Clear All Saved Memory using the RS-232 Interface

CAUTION

Before proceeding further, it is essential to understand that this function eliminates all data

stored in RAM. This means that all saved site setups, including the site data of a flow-

calibrated site will be erased! Also, the entire Datalogger file plus any custom factory or user-

created pipe or sensor tables will be eliminated. The impact of this is such that we strongly

recommend that you consult our technical service department before continuing with this

procedure. If you choose to continue, be aware that you will have to create a new site setup,

re-enter all site specific parameters including pipe or sensor tables, plus all desired Meter

Facilities entries.

Appendix
A.4 Site Setup For SITRANS F

FUP1010 IP67 Portable Flowmeter

144

Operating Instructions, 02/2010, A5E02951522A Revision 01

Содержание SITRANS FUP1010

















































































































































































































Результаты поиска

Содержание SITRANS FUP1010

Отзывы:

Siemens SITRANS FUP1010, Руководство по эксплуатации, Страница: 146 / 208

Результаты поиска

Содержание SITRANS FUP1010

Отзывы: