manualshive.com logo in svg

Siemens SITRANS F M MAG 3100, Руководство по эксплуатации, Страница: 51 / 90

Поделиться
Скачать
Siemens SITRANS F M MAG 3100 Скачать руководство пользователя страница 51

Service and maintenance

6

6.1

Maintenance

The device is maintenance-free. However, a periodic inspection according to pertinent directives 
and regulations must be carried out.   

An inspection can include check of:

• Ambient conditions

• Seal integrity of the process connections, cable entries, and cover screws

• Reliability of power supply, lightning protection, and grounds

NOTICE
Repair and service must be carried out by Siemens authorized personnel only.

Note

Siemens defines flow sensors as non-repairable products. 

6.2

Recalibration

Siemens Process Instrumentation offers to recalibrate the sensor. The following calibration types 
are offered as standard:

• Standard matched pair calibration

• Customer-specified calibration

• Accredited Siemens ISO/IEC 17025 calibration

Note

For recalibration the SENSORPROM unit must always be returned with the sensor.

SITRANS FM MAG 3100
Operating Instructions, 12/2021, A5E03005599-AE

51

Содержание SITRANS F M MAG 3100



























































































Отзывы:

Нет отзывов