manualshive.com logo in svg

Siemens SITRANS F M MAG 3100, Руководство по эксплуатации, Страница: 49 / 90

Поделиться
Скачать
Siemens SITRANS F M MAG 3100 Скачать руководство пользователя страница 49

Before commissioning it must be checked that:

• The device has been installed and connected in accordance with the guidelines provided 

previous in this chapter and in Installing/Mounting (Page 23).

5.4

Potting

If sensor is buried or permanently submerged, terminal box must be encapsulated with silicon 
dielectric gel (non-toxic, transparent and self-healing gel).  

NOTICE
Electrical connections

Do not pot meter before electrical connections have been made.

• Mix the two components of the potting kit well and pour into terminal box.

• Let cure for approximately 24 hours at approximately 25°C (77°F). Curing time increases by 

100% per -10°C (-18°F).

 

Horizontal orientation

Vertical orientation

Note

Gel can be penetrated with test instruments or be removed in case of cable replacement.

Connecting

5.4 Potting

SITRANS FM MAG 3100
Operating Instructions, 12/2021, A5E03005599-AE

49

Содержание SITRANS F M MAG 3100



























































































Отзывы:

Нет отзывов