manualshive.com logo in svg

Siemens SITRANS F M MAG 3100, Руководство по эксплуатации, Страница: 13 / 90

Поделиться
Скачать
Siemens SITRANS F M MAG 3100 Скачать руководство пользователя страница 13

Table 2-4

MAG 3100 P (7ME634) PED Compliance for fluids over 100 °C (PED classification: gas)

Flange mm

EN 1092

B16.5

PN 10

PN 16

PN 40

Class 150

15

N/A

N/A

SEP

SEP

25

N/A

N/A

SEP

SEP

32

N/A

N/A

PED (II)

PED (I)

40

N/A

N/A

PED (II)

PED (I)

50

N/A

N/A

PED (II)

PED (I)

65

N/A

PED (II)

N/A

PED (II)

80

N/A

PED (II)

N/A

PED (II)

100

N/A

PED (II)

N/A

PED (II)

125

N/A

PED (II)

N/A

PED (II)

150

N/A

PED (II)

N/A

PED (II)

200

PED (II)

PED (II)

N/A

PED (III)

250

PED (II)

PED (III)

N/A

PED (III)

300

PED (II)

PED (III)

N/A

PED (III)

Table 2-5

PED table key

SEP

Product covered by PED under category SEP (Sound Engineering Practice)

PED

Product covered by PED under category I to III as fully PED-conforming

PED*

Product sold with or without PED certification (only pressure test not done, example 
water transport industry)

N/A

Size/pressure not available in the size range

CAUTION

All products sold outside of EU and EFTA are excluded from the Pressure Equipment 
directive, also products sold into certain market sectors are excluded. These include
1. Meters used in networks for the supply, distribution and discharge of water.
2. Meters used in pipelines for the conveyance of any fluid from offshore to onshore.
3. Meters used in the extraction of petroleum or gas, including christmas tree and manifold 

equipment.

4. Any meter mounted on a ship or mobile offshore platform.

Safety notes

2.3 Laws and directives

SITRANS FM MAG 3100
Operating Instructions, 12/2021, A5E03005599-AE

13

Содержание SITRANS F M MAG 3100



























































































Отзывы:

Нет отзывов