Siemens SIREC D200 Скачать руководство пользователя страница 129

Страница: 129 / 286

43-TV-25-35 GLO Iss.4 Dec 06 UK

123

A5E01001767-04

Power up

Printing Screens

All the Messages screens have a Print button, to execute this, the printer must first be con-
figured in

“Network Admin” on page 73

and in the

“Printer Menu” on page 98.

For de-

tails on suitable printer types see

“Print Support” on page 29.

The Printer function is a firmware option that is selectable from the Factory menu >

“Cred-

its” on page 92

Message List

All messages will conform to the following format: Type, Time, Date and Format.

The messages screen will hold the latest 200 messages.

Message button bar

The message button bar runs along the bottom of all messages screens. The button are:

•

Back

- Takes you back to the main Messages screen.

•

Jump

- Select an item in any of the message lists and press the Jump button. This will

take you to the exact time of the occurrence on the replay screen.

See “Replay” on page 158.

If the message requested is older that the oldest

chart time/data available a message box will appear and jump you to the oldest chart
time and date available.

•

Clear -

This will delete all the messages for the particular message screen you are in.

•

Print -

All the Messages screens have a Print button.

Select this and choose to

print All the Messages in the list or the Current page that will fill an A4 or Letter size
page.

Refer to Application Note 43-TV-07-32 on your CD or website for a list of possible error
messages.

Содержание SIREC D200































































































































































































































































































Результаты поиска

Содержание SIREC D200

Отзывы:

Бренды по названию

Популярные бренды

Siemens SIREC D200, Руководство пользователя

Результаты поиска

Содержание SIREC D200

Отзывы:

Бренды по названию

Популярные бренды