manualshive.com logo in svg

Siemens SIREC D200, Руководство пользователя

Поделиться
Скачать
Siemens SIREC D200 Скачать руководство пользователя страница 71

43-TV-25-35   GLO   Iss.4   Dec 06   UK

65

A5E01001767-04

Power up

Fuzzy Logging has been developed as a secure data storage technique which has a 
self teaching data storage algorithm so the recorder stores data at a variable rate to 
match the process being monitored. Fuzzy Logging has intelligent resources to enable 
the most effective and efficient way of using the scan rate, storage capacity and record-
ing time. 

See “Appendix F: Fuzzy Logging” on page 255

•   

Rate Units

 - Set the Units for the logging rate to be displayed. Select and choose the 

logging rate units from the drop down menu.

•   

Rate 

- This is the speed at which data is required to be logged. 

 

If the Millisecond option is selected as the 

Rate Units

 for the logging, then a drop down 

menu of options will appear. When all other 

Rate Units

 are selected a keypad will 

appear for user entry. Fastest rate is 20mS and slowest is 60 hours.

•   

Alarm Rate Units

 - Only available if the logging Type is set to Continuous. Set the Units 

for the Alarm logging rate to be displayed. Select and choose the alarm logging rate 
units from the drop down menu.

•   

Alarm Rate -

 Only available if the logging Type is set to Continuous. This is the new 

logging rate used when this pen goes into an active alarm state. To enable this feature 
to change the logging rate in an alarm state, see 

Change Log

 in the Alarms menu. 

 

If the Millisecond option is selected as the 

Alarm Rate Units

 for the logging, then a 

drop down menu of options will appear. When all other 

Alarm Rate Units

 are selected 

a keypad will appear for user entry.

•   

Method 

- Only available if the logging Type is set to Continuous. Select from a list of 

Methods. 

 

Sample:

 logs the last sampled reading. 

 

Average: 

logs the average of all the samples taken since the last log. 

 

Max/Min:

 logs the highest and the lowest of the sampled readings since the last log.

•   

Align

 - Only available if the logging Type is set to Continuous. Select and enter a value 

from the list to align the logging at specified intervals.  This will hold the start of logging 
until the aligned time selected occurs based on the recorders real time clock.

•   

Auto Fit 

- Only available if the logging Type is set to Fuzzy. Toggles On and Off. AutoFit 

ensures that the last sampled data point is logged before the signal goes out of the tol-
erance set in Band 1 or Band 2. When displayed on a graph, the input signal will auto-
matically fit to this last logged point. This gives a better fit for stepped input changes.

•   

Band 1 % 

- Only available if the logging Type is set to Fuzzy. This is where the toler-

ance is set for the input signal. Specify, as a percentage of the scale range, the toler-
ance band allowed above and below the input signal. Select and enter a value.

•   

Fuzzy Band 2 

- Only available if the logging Type is set to Fuzzy. Toggles On and Off. 

This is to enable a second tolerance to be set, configure it to be On to activate. Only 
used in conjunction with Autofit On, to specify the Band 2 %.

•   

Band 2 % -

 Only available if the logging Type is set to Fuzzy. This is where a tighter tol-

erance can be specified which must be set within the limits of Band 1. Specify, as a per-
centage of the scale range, the tolerance band allowed above and below the input 
signal. Select and enter a value.

When the setup is complete go back to the Pen # menu and complete the pen setup.

Содержание SIREC D200































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды