manualshive.com logo in svg

Siemens Sinamics S120M, Руководство по эксплуатации оборудования, Страница: 154 / 186

Поделиться
Скачать
Siemens Sinamics S120M Скачать руководство пользователя страница 154

An alarm is output if a line with distributed drives is not terminated using a line termination 

connector.

Line termination connector

S120M with line termination connector

After connecting it, tighten the termination connector so that it cannot be released using the tool 

provided.
● Tool: Allen key
● Tightening torque: 3.0 Nm (26.6 lbf in)
The line termination connector is included in the package enclosed with the AM600.
Missing line termination connectors can be reordered as spare parts with the following Article 

No.: 6SL3566-2DC00-0AA0.

Changing over the outlet direction of the line termination connector 
If you require a line termination connector in the opposite outlet direction, then you can change 

this yourself by rotating the plug insert through 180°.

WARNING

Hazardous voltage when changing over the plug inserts of prefabricated hybrid cables 
For prefabricated hybrid cables, it is not permissible to change over the plug inserts 

(see Hybrid cable (Page 135)). Hazardous touch voltages could occur, which could lead to 

severe injury or death.
● Only change over plug inserts for line termination connectors. 

Control cabinet design
8.6 Layout of the components

152

Manual, 06/2019, 6SL3097-5AW00-0BP1

Содержание Sinamics S120M



























































































































































































Отзывы:

Нет отзывов