Siemens SINAMICS G120P CU230P-2, Краткое руководство по эксплуатации

Страница: 6 / 52

CU230P-2 Control Units
6
Compact Operating Instructions, 01/2016, A5E37058917B AA
2
Scope of delivery
The delivery comprises at least the following components:
● A CU230P-2 Control Unit ready for operation with installed firmware. Options for
upgrading and downgrading the firmware can be found on the Internet:
Firmware (
http://support.automation.siemens.com/WW/news/en/67364620 ).
The fieldbus interface of the Control Unit depends on the Article No. The Article No., the
designation and the version of the hardware (e.g. 02) and firmware (e.g. 4.6) can be
found on the rating plate
①
of the Control Unit.
Designation Article number Fieldbus
CU230P-2 HVAC 6SL3243-0BB30-1HA3 USS, Modbus RTU, BACnet
MS/TP, P1
CU230P-2 DP 6SL3243-0BB30-1PA3 PROFIBUS DP
CU230P-2 PN 6SL3243-0BB30-1FA0 PROFINET IO, EtherNet/IP
● Compact Operating Instructions in German and English
● The inverter contains open-source software (OSS). The OSS license terms are saved in
the inverter.
Reading the OSS license terms
The inverter contains open-source software (OSS). OSS comprises open source text and
satisfies special license terms. If you wish to read the license terms, you must transfer them
from the inverter to a PC.
Procedure
To transfer the OSS license terms from the inverter to a PC, proceed as follows:
1.
Switch off the inverter power supply.
2. Insert an empty memory card into the card slot of the inverter.
Overview of the interfaces (Page 10)
3. Switch on the inverter power supply.
4. When you have switched on the power supply, wait 30 seconds.
During this time, the inverter writes the "Read_OSS.ZIP" file onto the memory card.
5. Switch off the inverter power supply.
6. Withdraw the memory card from the inverter.
7. Use a card reader and load the file to a PC.
You have then transferred the OSS license terms from the inverter to a PC, and you can now
read the license terms.