Siemens Sinamics Connect Series, Руководство по эксплуатации, Страница: 78 / 101

Getting connected to MindSphere
6.6 Parameter list
SINAMICS CONNECT
76
Operating Instructions, 10/2018, A5E45421408
6.6 Parameter list
The parameter list provides an overview of the parameter data that SINAMICS CONNECT
can collect from the converters and upload to MindSphere for further analysis. With the
parameter number, you can refer to converter specific documentation for more details of
each parameter.
To create aspects and variables in Asset Manager, you have to follow this parameter list. For
each aspect (eight aspects in total), you need to add the variables one by one as per the
name, unit, and data type of each parameter (one entry for one variable). For more
information about how to add variables, see Section "Creating aspects and variables
(Page 62)".
Pa-
rame-
ter ID
Parameter No. Name Description Unit Data
type
1)
Sam-
pling
cycle
Activa-
tion
status
V20 MM440 G120
1 r0026 r0026 r0026 portX_Act_filtered_DC_link
_volt
2)
Displays filtered DC-link
voltage
V Double 5 s Active
2 r0025 r0025 r0025 portX_Act_filtered_output_
voltage
Displays filtered [rms]
voltage applied to motor
V Double 5 s Active
3 r0032 r0032 r0032 portX_Act_filtered_power Displays (mechanical)
shaft power
kW Double 5 s Active
4 r0022 r0022 r0022 portX_Act_filtered_rotor_s
peed
Displays calculated
rotor speed based on
r0021
rpm Double 5 s Active
5 r0031 r0031 r0031 portX_Act_filtered_torque Displays electrical
torque
NM Double 5 s Active
6 r0039[0]
3)
r0039[0] r0039[0] portX_Energy_consumpt_
meter
Displays electrical en-
ergy used by converter
since display was last
reset
kWh Double 5 s Active
7 r0207[0] r0207[0] r0207[0] portX_Rated_converter_cu
rrent
Displays rated converter
current
A Double 5 s Active
8 p0305[0] p0305[0] p0305[0] portX_Rated_motor_curre
nt
Nominal motor current
from rating plate
A Double 5 s Active
9 r0002 r0002 r0002 portX_Converter_state Displays actual con-
verter state
- Double 5 s Active
10 r0018 r0018 r0018 portX_Firmware_version Displays version num-
ber of installed firmware
- Double 5 s Active
11
_ 4)
r0030 r0030 portX_CO_Act_filtered_cur
rent_Isq
Displays torque-
generating current
component
A Double 5 s Active
12 r0037[0] r0037[0] r0037[0] portX_CO_Converter_tem
perature
Heat sink temperature degC Double 5 s Active
13 r0035[0] r0035[0] r0035[0] portx_CO_Act_motor_tem
perature
Displays calculated
motor temperature
degC Double 5 s Active
14 r0947[0] r0947[0] r0945[0] portX_Fault_code_1 Recent fault trip 1 - Double 5 s Active
15 r0947[1] r0947[1] r0945[1] portX_Fault_code_2 Recent fault trip 2 - Double 5 s Active
16 r0947[2] r0947[2] r0945[2] portX_Fault_code_3 Recent fault trip 3 - Double 5 s Active
17 r0947[3] r0947[3] r0945[3] portX_Fault_code_4 Recent fault trip 4 - Double 5 s Active