Siemens simovert master drive Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 84

background image

08.96

Description

Siemens AG 6SE7087-6BM70

1-1

SIMOVERT MASTER DRIVES Operating Instructions

1 Description

SIMOVERT MASTER DRIVES are power electronic units. They are available as

♦

Compact units

with three-phase- or DC current input
Output range: 2.2 kW to 37 kW

♦

Chassis units

with three-phase- or DC current input
Output range: 45 kW to 200 kW

♦

Cabinet units

with three-phase- or DC current input
Output range: 250 kW to 1500 kW

There are three versions depending on the particular application

♦

Frequency control

FC

simple applications (e.g. pumps and fans)

♦

Vector control

VC

high demands regarding dynamic performance and accuracy

♦

Servo Control

SC

servo drives

1.1 Applications

Drive converter with DC current input

DC drive converters generate a variable-frequency three-phase system at the motor side from a DC supply. This
variable-frequency three-phase system is used to continuously control the speed of three-phase motors.:

SIMOVERT MASTER DRIVES can be used with a common DC link, as well as for single-motor and multi-motor
drives.

Technological functions and expansions can be realized via defined interfaces in the open-loop control section.

1.2

Mode of operation

Converters with DC current input are suitable for coupling several converters to a common DC link bus. This
permits energy transfer between drives in the motoring and generating modes which in turn means energy
savings.

The DC converter must be connected to the DC bus through an E unit (rectifier unit) due to the pre-charging of
the DC link capacitors. If an I/R unit (rectifier and regenerative feedback unit) is used instead of the E unit, power
is fed back into the supply if the regenerative output for several drives is greater than the motor power required.

The converter is ready for operation after the DC link capacitors have been pre-charged.

The inverter, configured using IGBT modules, generates a three-phase system from the DC link voltage to feed
the motor.

«
...
9
10
11
12
13
...
»

Содержание simovert master drive





















































































Отзывы:

Нет отзывов

Похожие инструкции для simovert master drive

Бренд: CYP Страницы: 8

Бренд: Audio Note Страницы: 7

Бренд: StarTech.com Страницы: 3

Automotive Ethernet Converter

Бренд: X2E Страницы: 22

ALL-USB-RS422/485

Бренд: Allnet Страницы: 6

Бренд: Delta Страницы: 1

Бренд: 3onedata Страницы: 2

Бренд: Hagstrom Страницы: 36

SureSine 1000 W

Бренд: Morningstar Страницы: 66

Бренд: Tektronix Страницы: 41

Бренд: ANTAIRA Страницы: 27

Бренд: ADF Web Страницы: 32

Бренд: B&B Electronics Страницы: 31

IFS MC352-4P-2S

Бренд: Interlogix Страницы: 31

Бренд: Speaka Professional Страницы: 8

Бренд: AEG Страницы: 150

Бренд: CYP Страницы: 11

Бренд: NRG Systems Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды