Siemens SIMOTICS XP 1MD4 Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 128

Siemens SIMOTICS XP 1MD4 Скачать руководство пользователя страница 15

WARNING

Rotating components
Electric machines contain dangerous rotating parts.
Fatal or severe injuries and substantial material damage can occur if the covers are removed

or if the machine is not handled, operated, or maintained properly.
● Only remove the covers using the methods described by these operating instructions.
● Operate the machine properly.
● Perform regular maintenance on the machine.
● Secure free-standing shaft ends.

WARNING

Hot surfaces
Electric machines have hot surfaces. Do not touch these surfaces. They could cause burns.
● Allow the machine to cool before starting work on the machine.
● Only remove the covers using the methods described by these operating instructions.
● Operate the machine properly.

CAUTION

Hazardous substances
Chemical substances required for the setup, operation and maintenance of machines can

present a health risk.
Poisoning, skin damage, cauterization of the respiratory tract, and other health damage may

result.
● Read the information in these operating instructions and the product information supplied

by the manufacturer.

● Observe the relevant safety regulations and wear the personal protective equipment

specified.

CAUTION

Flammable substances
Chemical substances required for the setup, operation and maintenance of machines may

be flammable.
Burns and other damage to health and material may result.
● Read the information in these operating instructions and the product information supplied

by the manufacturer.

● Observe the relevant safety regulations and wear the personal protective equipment

specified.

Safety notes

2.4 Safe handling

SIMOTICS XP 1MD4/1MD5

Operating Instructions 05/2015

15

«
...
13
14
15
16
17
...
»

Содержание SIMOTICS XP 1MD4

































































































































Отзывы:

Нет отзывов