EIP-200S Ethernet/IP Adapter
2.8 Technical specifications
EIP-200S Ethernet/IP Adapter Distributed I/O System
52
System Manual, 06/2018, A5E44345053-AB
2.8
Technical specifications
SIMATIC DP, interface module EIP-200S Ethernet/IP Adapter:2 Ethernet ports with RJ45
connectors; up to 2 m width connectable to a maximum of 63 power, electrical, or motor
starter modules.
SUPPLY VOLTAGE
Power supply hold-up time
Hold-up time, min.
20 ms
INPUT CURRENT
From supply voltage 1L+, max.
250 mA
POWER LOSSES
Power loss, typ.
2.5 W
ADDRESS AREA
Addressing volume
Outputs
255 bytes
Inputs
255 bytes
INTERFACES
Supports protocol for Ethernet/IP
Automatic detection of transmission speed
Yes
Transmission rate, max.
100 Mbps
RJ45 (2 ports)
Yes
PROTOCOLS
Supports protocol for Ethernet/IP
Yes
INTERRUPTS/DIAGNOSTICS/STATUS INFORMATION
Diagnoses
Diagnostic functions
Yes
Diagnostics indication LED
Module Status, Network Status, and I/O Sta-
tus LEDs
Yes
Monitoring 24 V voltage supply ON (green) Yes
Connection to network LINK (green)
Yes
GALVANIC ISOLATION
Between backplane bus and electronics
No
Between supply voltage and electronics
No
Between Ethernet and electronics
Yes
DIMENSIONS
Width
60 mm
Height
119.5 mm
Depth
75 mm
WEIGHT
Weight, approx.
120 g