Introduction
1.4 Decommissioning and Disposal
1.4
Decommissioning and Disposal
Proper decommissioning and disposal of this device is important to prevent malicious
users from obtaining proprietary information and to protect the environment.
Decommissioning
This device may include sensitive, proprietary data. Before taking the device out of
service, either permanently or for maintenance by a third-party, make sure it has
been fully decommissioned.
For more information, refer to the associated
Configuration Manual
.
Recycling and Disposal
For environmentally friendly recycling and disposal of this device and related
accessories, contact a facility certified to dispose of waste electrical and electronic
equipment. Recycling and disposal must be done in accordance with local
regulations.
1.5
Cabling Recommendations
Siemens recommends using RUGGEDCOM industrial Ethernet shielded cables for all
Ethernet ports.
Siemens does not recommend the use of copper cabling of any length for critical,
real-time substation automation applications. All copper Ethernet ports on
RUGGEDCOM products include transient suppression circuitry to protect against
damage from electrical transients and conform with IEC 61850-3 and IEEE 1613 Class
1 standards. This means that during a transient electrical event, communications
errors or interruptions may occur, but recovery is automatic.
Siemens also does not recommend using copper Ethernet ports to interface with
devices in the field across distances that could produce high levels of ground
potential rise (i.e. greater than 2500 V), during line-to-ground fault conditions.
1.5.1
Supported Fiber Optic Cables
The following fiber optic cable types are supported under the stated conditions.
Distance (m)
Cable Type
Wavelength (nm) Modal Bandwidth
(MHz·km)
100Base-FX
1000Base-SX
10GBase-SR
850
200
—
275
33
OM1 (62.5/125)
1300
500
2000
—
—
850
500
—
550
82
OM2 (50/125)
1300
500
2000
—
—
OM3 (50/125)
850
1500
—
550
300
6
RUGGEDCOM RS969
Installation Manual, 01/2021, C79000-G8976-1038-03
Содержание SIMATIC NET RUGGEDCOM RS969
Страница 9: ...Preface Contacting Siemens viii RUGGEDCOM RS969 Installation Manual 01 2021 C79000 G8976 1038 03 ...
Страница 17: ...Introduction 1 6 Ingress Protection 8 RUGGEDCOM RS969 Installation Manual 01 2021 C79000 G8976 1038 03 ...
Страница 47: ...Accessories 6 5 LC Fiber Optic 2 unit 38 RUGGEDCOM RS969 Installation Manual 01 2021 C79000 G8976 1038 03 ...