Siemens SIMATIC NET RUGGEDCOM RS969, Руководство по установке

Страница: 14 / 56

Introduction
1.3 Required Tools and Materials
4
POWER 2 LED
5
ALARM LED
6
RS-232 Console Port
7
Failsafe Output Relay
8
M23 Power Supply Port
9
Fiber Optic Ethernet Ports
10
Surge Ground Connection
11
Chassis Ground Connection
Figure 1.2 RUGGEDCOM RS969 (RJ45 Connectors Shown)
Port Status LED Indicate the status of each port.
State Description
Yellow (Solid) Link established
Yellow (Blinking) Link activity
Off No activity
POWER LED 1/POWER LED 2 Illuminates when power is supplied to the associated internal
power supply.
ALARM LED Indicates when an alarm condition exists.
Failsafe Alarm Relay Latches to default state when a power disruption or other alarm
condition occurs. For more information, refer to:
•
"Connecting the Failsafe Alarm Relay (Page 11)"
• "Failsafe Alarm Relay Specifications (Page 25)"
Power Supply Terminal The power supply port. For more information, refer to:
•
"Connecting Power (Page 12)"
• "Power Supply Specifications (Page 25)"
RS-232 Console Port For interfacing directly with the device and accessing initial
management functions. For information about connecting to the
device via the console port, refer to "Connecting to the Device (Page
19)" .
Copper/Fiber Ethernet Ports For information about available copper and fiber Ethernet ports,
refer to " Communication Ports (Page 21)" .
1.3 Required Tools and Materials
The following tools and materials are required to install the RUGGEDCOM RS969:
Tools/Materials Purpose
AC or DC power cord (16 AWG) For connecting power to the device.
CAT-5 Ethernet cables For connecting the device to the network.
Phillips screwdriver For mounting the device to a panel.
4 x #6-32 screws For mounting the device to a panel.
RUGGEDCOM RS969
Installation Manual, 01/2021, C79000-G8976-1038-03
5