Siemens SIMATIC NET IE/AS-INTERFACE LINK PN IO, Руководство пользователя

Страница: 123 / 193

8 Using the Data Record Interface
123
IE/AS − INTERFACE LINK PN IO
as of hardware version 1, as of firmware version V2.0
Release 08/2018
C79000 − G8976 − C216 − 03
Device-specific errors of the link for the “Status” return value
Table 8-3 Error Detection in “STATUS[4]” of the Return Value of the IE/AS-i LINK
STATUS[4] Meaning
01
H
Invalid CTT2 index
02
H
Invalid CTT2 length
04
H
CTT2 slave is temporarily busy.
05
H
The addressed AS-i slave was not found on the AS-Interface.
06
H
An AS-i slave with address 0 exists.
07
H
An AS-i slave with the new address already exists on the AS-Interface.
08
H
The AS-i slave address cannot be deleted.
09
H
Error reading the extended ID1 code
0A
H
The AS-i slave address cannot be set.
0B
H
The AS-i slave address cannot be stored permanently.
21
H
The AS-i slave address is incorrect
22
H
The AS-i slave is not activated (not in LAS).
23
H
Error on the AS-Interface
24
H
The call not permitted in the current status of the AS-i master.
25
H
An AS-i slave with address 0 exists.
26
H
The AS-i slave has illegal configuration data (I/O or ID codes).
27
H
The target address is not plausible (for example a B slave address was used for a
standard slave).
2E
H
The job number or the job parameter is unknown.
2F
H
The AS-i master has detected an EEPROM error.
31
H
A length error has occurred transferring a string.
32
H
A protocol error has occurred transferring a string.
33
H
CTT2 slave not initialized.
FF
H
Error not specified in greater detail
You will find other, general error IDs in the Help on SFB54.