SIMATIC IPC520A
Operating Instructions, 11/2021, A5E51366325-AA
39
Expanding the device
5
5.1
Installing the M.2 module
Introduction to the M.2 module
Siemens uses the M.2 module to extend the Siemens IPC. You can use M.2 module produced
by Siemens or other third-party suppliers. Our device provides two M.2 Key B/ Key E interfaces
and mounting positions. M.2 key B module or Key E module can be connected to the
interface slot X100 or X101 on the motherboard.
The position of each slot is marked in the following image.
Installation of the M.2 module in our device should not exceed the specified maximum
outline or the maximum allowed power dissipation. The following table contains the detailed
features and functions of the M.2 module:
Module
M.2 module 1
(Slot X100)
M.2 module 2
(Slot X101)
Features and function
Size
2230
2242, 3042, 2250
Interface
Key E
Key B
Channel
1 × PCIe 3.0 (1 lane) + 1 × USB 2.0
1 × PCIe 3.0 (1 lane) + 1 × USB 3.0
Support WLAN module, like Wi-Fi,
Bluetooth
Yes
No
Support WWAN module
1
, like 3G/4G/ 5G
No
Yes
Support NVMe SSD
No
Yes
1
: You can insert a 4G/5G SIM card into the SIM card slot to connect to network. But SIM card
function has not been certified in ordinary location.
Requirements
•
A T10 screwdriver
Содержание Simatic IPC520A
