Siemens SIMATIC Field PG M6 Скачать руководство пользователя страница 74

Страница: 74 / 120

Technical specifications

9.2 Directives and declarations

SIMATIC Field PG M6

Operating Instructions, 12/2018, A5E43198909-AA

9.2

Directives and declarations

9.2.1

Notes on the CE mark

The following applies to the SIMATIC product described in this documentation:

RED Directive

This product is designed for the following applications:

Application

Requirement for

Emissions

Immunity

Residential, business and commercial oper-

ations, and small businesses

EN 61000-6-3

EN 61000-6-1

Industrial applications

EN 61000-6-4

EN 61000-6-2

This product meets the requirements of the Radio Equipment Directive: 2014/53/EU
The protection goals of the directive were tested according to the following standards:

● Health: EN 50566

● Safety: EN 62368

-1:

● EMC: EN 301 489

-1, EN 301 489-17,

● Radio: EN 300 328, EN 301 893,

RoHS Directive

This product meets the requirements of the RoHS Directive (Restriction of Hazardous

Materials): 2011/65/EU.
Compliance with the directive was tested according to the following standard: EN 50581.

Declaration of conformity

The EC declaration of conformity and the corresponding documentation are made available

to authorities in accordance with the EC directives stated above. Your sales representative

can provide these on request.

Installation guidelines

The installation guidelines and safety notices specified in the supplied documentation must

be adhered to during commissioning and operation.

Connecting peripherals

Noise immunity requirements to EN 61000-6-2 are met if connected peripherals are suitable

for industrial applications. Peripheral devices must only be connected using shielded cables.

Содержание SIMATIC Field PG M6

























































































































Результаты поиска

Содержание SIMATIC Field PG M6

Отзывы:

Похожие инструкции для SIMATIC Field PG M6

Бренды по названию

Популярные бренды

Siemens SIMATIC Field PG M6, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC Field PG M6

Отзывы:

Похожие инструкции для SIMATIC Field PG M6

Бренды по названию

Популярные бренды