Siemens SIMATIC Field PG M6 Скачать руководство пользователя страница 57 | Manualshive

Страница: 57 / 120

background image

Operating the device

6.1 Notes on operation

SIMATIC Field PG M6
Operating Instructions, 12/2018, A5E43198909-AA

57

6.1.5.2

Safety notices for WLAN and Bluetooth operation

You can switch the WLAN of the Field PG off and on with the hotkeys Fn + F3.

●

The radio waves necessary for WLAN and Bluetooth can cause interference in hearing

aids (unpleasant buzzing) and in the onboard electronics of vehicles. To prevent

interference, switch off the Field PG in aircraft, or when driving a vehicle.

●

Radio waves caused by WLAN and Bluetooth may lead to malfunctioning of life-support

systems. Switch off the WLAN and Bluetooth function if you are in the proximity of such

systems, e.g. hospitals, medical electronic systems.

●

The range of the wireless connection and the achievable data transmission rate depend

on the ambient and environmental conditions.

●

A WLAN and Bluetooth connection is not tap-proof. Unauthorized third parties can then

receive data.
To protect the transmitted data, WLAN and Bluetooth have different encryption methods.

We recommend that you activate an encryption in accordance with your WLAN and

Bluetooth environment.

●

If possible, do not bring the WLAN and Bluetooth connection in the vicinity of the following

devices as the operation of these devices may result in faults or the complete failure of

the WLAN and Bluetooth connection:
–

Microwaves

–

Wireless video-audio transmission systems

–

Wireless telephones (DECT)

CAUTION

Risk of interference with pacemakers
The radio waves of WLAN and Bluetooth may interfere with pacemakers.
If you wear a pacemaker, keep a minimum distance of 20 cm from the Field PG when

WLAN or Bluetooth is activated.

CAUTION

Danger of explosion
The radio waves transmitted by WLAN and Bluetooth may trigger an explosion or fire.
Switch off WLAN and Bluetooth of the Field PG if you go in the vicinity of flammable gases

or in an explosive environment (e.g. paint shop).

Siemens is not responsible for radio or television interference that has been caused by

unauthorized changes to this device. Furthermore, Siemens shall not be held responsible for

the use or replacement of connecting cables and devices that have not been recommended

by Siemens. The user alone is responsible for remedying faults that have been caused by

such an unauthorized change, or for the use or the replacement of the device.

«
...
55
56
57
58
59
...
»

Содержание SIMATIC Field PG M6

























































































































Отзывы:

Нет отзывов

Похожие инструкции для SIMATIC Field PG M6

Бренд: Yamaha Страницы: 90

Бренд: Acconeer Страницы: 14

Бренд: Texas Instruments Страницы: 19

Бренд: P&E Microcomputer Systems Страницы: 38

Бренд: Atmel Страницы: 16

Бренд: DFI Страницы: 67

Бренд: ASROCK Страницы: 30

TPS628436-7-8EVM-167

Бренд: Texas Instruments Страницы: 15

Бренд: Aaeon Страницы: 119

Бренд: ASROCK Страницы: 64

Бренд: Biostar Страницы: 31

Бренд: ECS Страницы: 82

B550 AORUS ELITE AX V2

Бренд: Gigabyte Страницы: 12

Бренд: Telaire Страницы: 4

Advance 10T Series

Бренд: QDI Страницы: 74

Бренд: Advantech Страницы: 116

X58 PLATINUM SLI - Motherboard - ATX

Бренд: MSI Страницы: 74

Бренд: Intel Страницы: 92

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды