Siemens SIMATIC CN 4100 Скачать руководство пользователя страница 30

Страница: 30 / 76

Applications
• Mounting a rack (Page 31)

• Grounding the rack with a cable (Page 32)

Plugging in the modules

Plug the modules into the slots of the rack. Start from the left with the CPU modules.

If a slot is not equipped with a module, plug a slot cover onto the slot.

Application
• Plugging in the module (Page 33)

• Grounding the module with a cable (Page 34)

5.6

Installation

5.6.1

Removing the grounding screw

Requirement

• The rack is to be used in a system with central grounding.

If the rack is to be used grounded, skip this topic.

• The rack has not yet been mounted.

• Required tools:

– TX10 screwdriver to pull out the grounding screw

Procedure

Remove the grounding screw on the back of the rack. Note the following setup in doing so.

Installation
5.6 Installation

CN 4100 Communication System

Equipment Manual, 10/2021, A5E50871363-AA

Содержание SIMATIC CN 4100













































































Результаты поиска

Содержание SIMATIC CN 4100

Отзывы:

Siemens SIMATIC CN 4100, Руководство по эксплуатации оборудования, Страница: 30 / 76

Результаты поиска

Содержание SIMATIC CN 4100

Отзывы: