manualshive.com logo in svg

Siemens SIMATIC CN 4100, Руководство по эксплуатации оборудования, Страница: 74 / 76

Поделиться
Скачать
Siemens SIMATIC CN 4100 Скачать руководство пользователя страница 74

Unique, complete offer for the entire life cycle

Whether machine manufacturer, solution provider or plant operator: The range of services 
offered by Siemens Digital Industries includes comprehensive services for a wide variety of users 
in all sectors of the manufacturing and process industry.

We offer integrated and structured services for our products and systems that provide valuable 
support in every lifecycle phase of your machine or plant – from planning and implementation 
to commissioning, maintenance and modernization.

Our Service & Support accompanies you worldwide in all matters related to Automation and 
Drives from Siemens. In more than 100 countries, directly on site and throughout all phases of 
the life cycle of your machines and plants.

An experienced team of specialists actively supports you with bundled know-how. Regular 
training and intensive contact between our employees – even across continents – ensure 
reliable service in a wide range of areas.

Online Support

The comprehensive online information platform covering all aspects of our Service & Support 
supports you at any time from anywhere in the world.

You can find Online Support at the following address on the Internet (

https://

support.industry.siemens.com/cs/

).

Technical consulting

Support for planning and conception of your project: From a detailed analysis of the current 
situation and definition of objectives, to advice on product and system issues, to the elaboration 
of the automation solution.

Technical Support

Competent consulting for technical questions with a wide range of demand-oriented services 
surrounding our products and systems.

You can find technical support at the following address on the Internet (

https://

support.industry.siemens.com/My/ww/en/requests

).

Training

Extend your lead – through practical know-how directly from the manufacturer.

You can find our training offering at the following address on the Internet (

https://

sitrain.automation.siemens.com/sitrainworld/

).

Engineering support

Support for planning and development with needs-based services from configuration to 
implementation of an automation project.

Service & Support
C.1 Service & Support

CN 4100 Communication System

74

Equipment Manual, 10/2021, A5E50871363-AA

Содержание SIMATIC CN 4100













































































Отзывы:

Нет отзывов